Finally, there is a solution to sore knees, poles and power stretchers that is accepted by carpet manufacturers and professional carpet installation trainers alike. Yet, it is the perfect tool for you, the professional carpet cleaner, to add even more profit to your average job ticket.
How many homes have you gone into where there were pesky waves in the carpet that simply needed a quick re-stretching? But the thought of learning how to operate a power stretcher, getting out all those tubes, and moving the furniture aside may have been a bit overwhelming.
Unfortunately for the homeowner, many carpets today have not been installed using professionally specified procedures. And even when carpet has been installed properly, all synthetic carpet needs to be re-stretched occasionally. That's why almost every house you clean has carpet bubbles.
Most cleaners are walking away from hundreds of dollars EACH DAY in highly profitable re-stretches. That's because power stretchers weigh a ton, take forever to set up, and getting the re-stretch just right can be tricky. As a result, cleaners end up passing on the work, or giving it away to someone else. This is an opportunity for you to earn more profit that is now made easy with the Behr Claws.
If water damage work is part of your offering, you know that many water jobs require reinstallation or re-stretching of the carpet following drying. The Behr Claws tool allows you to perform perfect stretches quickly and easily. This tool will make reinstalls easier than ever before. And all it takes to become an expert at it is just a couple of jobs for "on the job" training. Click here to see how the Behr Claws makes re-stretching a snap!
As a professional carpet cleaner, you can do a quick and easy re-stretch and earn extra income. With the Behr Claws, any professional carpet cleaner, restoration professional, or carpet installer can make quick work of turning a rumpled mess into perfectly stretched in carpet. This tool will even work with furniture in the room!
The Behr Claws is the world's best carpet re-stretcher and allows cleaners to make really big money with this add-on service! The national average for re-stretches is $65 - $100 per room! Your Behr Claws will pay for itself in just two weeks or less! This amazing tool was developed by two professional carpet installers, Tim & Jerry Behr. This patented device is one of those "Why didn't I think of it?" inventions.
The ingenious design of the Behr Claws allows the tool to hook over the tackless strip and pull the carpet to the proper tension. The "claws" grab onto the wall side of the tack strip and the head from any regular power stretcher is engaged into the carpet to achieve a perfect professional stretch without puncturing the carpet.
Next, you attach the carpet to the tackless strip, tilt the Behr Claws, slide it to the next position and continue the stretch. Because the Behr Claws pulls from the tackless, you get a perfect perpendicular stretch every time. It works on wood or concrete floors and is amazingly fast and easy to use. You can even do complete re-stretches without removing the furniture! It's perfect for re-installing carpet after flood restoration.
The Behr Claws is always set up, weighs just 13 pounds, and easily stores behind the seat in your van. You can buy the Behr Claws alone to use with your existing power stretcher head, or buy the optional Power Stretcher Junior Head. Each is sold separately.
You'll make more money with less risk than other add-ons like upholstery cleaning and your customers will be thrilled too!
But don't just take my word for it. Here is what one of our customers had to say who is using the Behr Claws every day;
|
We've been in business for 5 years and we do tons of re-installs. When i first saw the Behr Claws I was very skeptical but we bought one after seeing a demo. Now we swear by it. We can re-install twice as fast as before. We're very happy with this product. We also do re-stretches on carpet where we find a bubble. Those add up to an extra $125 for just another 15-20 minutes worth of work. We used to use a power stretcher. Now we don't have to haul around all the big heavy poles. We just have our Behr Claws in a nice slot on our truck, and it goes with us on every job. It pays for itself every day; a real money maker. Using the process with the aluminum nails and two techs, we can stretch a whole basement in the same amount of time it used to take us to just set up our old system. Our team is using four Behr Claws now and we'll never go back to the old way. - Ross Peterson, Rocky Mountain Restoration |
Training DVD's are available FREE from your local interlink Supply Distributor. To see a video presentation of how the Behr Claws works for re-installation, click here.
The Behr Claws is available exclusively from your local Interlink Supply Distributor. You can't get it anywhere else. At a price of only $299, it will pay for itself in just a few jobs. If you need a Power Stretcher Head also, you can pick that up for only $226.